French Instructions - Omcan PE-IT-0019-S Manual Del Usuario

The oven doesn't heat despite the
main switch is on (position 1) and
the temperatures are correctly
set. The function pilot lights of the
heating elements are off.
The analogical thermometer
doesn't notice the increase of the
temperature despite the heating
elements are correctly functioning.
Inner light bulb does not switch on. Burned inner light bulb.
The door is closed, but fume
comes out.
The baking chamber does not heat
suitably.
The baking chamber does not heat
suitably in spite of the temperature
being set rightly.
The temperature continues going
up over the set by thermostats.
The door does not keep right
closed.
SÉCURITÉ ET GARANTIE
À L'ATTENTION DE L'INSTALLATEUR
Vérifiez que l'emplacement du four est en conformité avec les réglementations locales.
• Veuillez observer les consignes indiquées dans le manuel.
• N'utilisez pas de branchement électrique de type "volant" basé sur des câbles provisoires ou non isolés.
• Verriez que la mise à la terre de l'installation électrique soit bien fonctionnant.
• Utilisez toujours les dispositifs de sécurité individuelle et tout autre moyen de protection prévus par la loi.
No electric Energy in the net.
Analogical thermometer defect.
Inner light bulb switch defected.
No electric supply power on the
light bulb.
Exhauster butterfly valve closed.
The set temperature are too low.
One or more heating elements are
defected.
Thermostat probe or thermostat
contacts defected.
The door closing spring has
subsiding.

French Instructions

9
Troubleshooting
Check the general contactor, the
socket, the plug, and the supply
cable.
Check and if necessary replace the
thermometer.
Replace inner light bulb.
Replace light bulb switch.
Check electric connection with the
light bulb.
Open more the valve and check
the right functioning.
Set the right temperature.
Replace the defecate heating
elements.
Check and if necessary replace the
thermostats.
Disassemble the left side panel
and replace the spring.