Tools And Materials Required - Delta 36x36 Manual De Instalación

REQUIREMENTS FOR SUCCESSFUL INSTALLATION
DO NOT use drywall screws to secure flanges to wall studs. Product damage will occur and will void the warranty.
! CAUTION:
◘
Read complete instructions before beginning installation.
◘
These instructions include suggestions for rough construction and plumbing installation that we believe to be reliable.
Local building codes vary and could supersede those suggestions. If you are not confident in your ability to perform
these tasks, contract out those tasks you need help with or use a professional installer.
◘
Confirm that your model will fit in intended location and plumbing fixtures are located where required before beginning
installation.
◘
Walls and sub-floor must be solid, plumb, and square.
◘
Use drop cloth to protect shower base from damage during installation.
◘
Do not install in areas where temperature may drop below 32ºF (0ºC).
◘
Allow product to reach room temperature for 30 minutes before installation.
◘
Two people recommended to install this product.

tools and Materials reQuired

Safety glasses
Square
1-1/4" screws
(zinc or stainless;
Drill panhead or
roundhead)
◘
2" x 6" lumber for shower door/curtain rod reinforcement
◘
Lumber for bracing
◘
Rags or padding to protect product during bracing
TIP: You may want to install insulation.
L
Utility knife Pencil
Level
2-1/2" construction
screws
Tape measure
Caulk gun
Hole saw Extension bit
(sized to holder
accommodate (recommended)
plumbing fixtures)
3
Shims
Adhesive Sealant
(2 tubes) (2 tubes)
#2 Phillips bit
(for use with
extension bit
holder)
Drop cloth
Drill bit
3/16" (5 mm)
P/N 27794 09/13