Parts Required - Redline Sports G01320W Manual Del Usuario

STEP 1:
Find a clean, level place to begin the assembly of your soccer table. We recommend building the table on the
box top to protect the parts during assembly.
Attach one P2 End Apron to the P1 Side Aprons using pre-drilled pilot holes with H4 Screws as shown in
FIGURE 1. Tighten, but do not strip out H4 screws.
Slide P4 Playfield with the graphic facing down, into the grooves of P1 Side Aprons as shown in FIGURE 1.
H4
H4
P2
H4
STEP 2:
Attach other P2 End Apron to previous cabinet assembly using pre-drilled pilot holes with H4 Screws as shown
in FIGURE 2. Tighten, but do not strip out H4 screws.
Place P5 Playfield Support Braces onto P4 Playfield and attach to P1 Side Aprons using pre-drilled holes with
H5 Screws as shown in FIGURE 2. Tighten, but do not strip out H5 screws.
NOTE: As P5 Playfield Support Braces are rectangular in shape - please be sure to install support braces
turned "TIGHT" against playfield.
FIGURE 2
H5
P4
All Rights Reserved.
© 2012 Escalade Sports
4 pcs - H4 Phillips Flat Head Screw
2 pcs - P1 Side Apron
P1
4 pcs - H4 Phillips Flat Head Screw
6 pcs - H5 Phillips Washer Head Screw
H5
P5
P1

PARTS REQUIRED:

1 pc - P4 Playfield
1 pc - P2 End Apron
P1
PARTS REQUIRED:
1 pc - P2 End Apron
3 pcs - P5 Playfield Support Brace
H5
P1
P5
H5
5
P5
H5
H5
For Customer Service Call 1-888-996-2729
FIGURE 1
P4
Artwork
graphic
face down
H4
H4
P2
H4