Kärcher HDS 5.0/30-4 S Eb Manual Del Usuario página 13

Please do not let mineral oil contami-
nated waste water reach soil, water or
the sewage system. Perform engine
cleaning and bottom cleaning there-
fore only on specified places with an
oil trap.
Working with the high pressure noz-
zle
The spray angle is essential for the ef-
fectiveness of the high pressure ray.
Normally work is performed with a 25°
flat ray nozzle (included).
Recommended nozzles are deliverable
as accessories
– For strong contaminations
0° full ray - nozzle
– For sensitive surfaces and light con-
taminations
40° flat ray - nozzle
– For thick layered, persistent contam-
inations
Dirt grinder
– Nozzle with adjustable spray angle,
for adaption to different cleaning
tasks
Angle-Vario-Nozzle
Cleaning
set pressure/temperature and deter-
gent concentration according to the
surface to be cleaned.
Note
To prevent damage due to too much
pressure, always position high pressure
ray first from a greater distance towards
object to be cleaned.
Recommended cleaning method
– Loosen the dirt:
Spray detergent economically and
let it work for 1...5 minutes but do not
let it dry up.
– Remove the dirt:
Spray off loosened dirt with the high-
pressure ray.
Operating with cold water
Removal of light contaminations and
clear rinse, i.e.: Gardening tools, ter-
race, tools, etc.
Set operating pressure according to
need.
Set temperature regulator to "0".
Operating with hot water
DANGER
Scalding danger!
Set temperature regulator to desired
temperature.
We recommend the following cleaning
temperatures:
– Light contaminations
30 -50 °C
– Contaminations containing protein,
i.e. in the food processing industry
max. 60 °C
– Vehicle cleaning, machine cleaning
60 -90 °C
Operating with steam
DANGER
Scalding danger! The operating pressure
must not exceed 2.8 MPa when operat-
ing with temperatures above 98 °C.
Therefore the following measures must
definitely be performed:
13
English