Location Of Controls - THOMSON TT200 Manual Del Usuario

1) Dust cover
2) Power switch
3) Power LED indicator
4) Spindle adaptor
5) Anti shock alignment screw
6) Alignment screw with rubber cover
7) Counter weight
8) Anti skating
9) Turntable speed selector
10)Cueing lever
11)Tone-arm lock
12)Line out socket (L/R)
13)AC power cord
Caution:
Usage of controls or adjustments or performance of procedures other than those specified herein may
result in hazardous radiation exposure.
This unit should not be adjusted or repaired by anyone except qualified service personnel.
Connection
1. Connect the power cord (13) to an AC outlet.
2. Connect line out RCA connectors (12) located on the unit back to your external amplifier to listen to the
music.
3. Turn on the unit by press the power switch (2), the power LED indicator (3) will light up. Your system is
now ready to play your music. Please refer to the Operations section of this Manual for details.
Installation of counter weight
1 Slide in the counter weight (7) completely into the rear of the tone arm until it reach the end turn it
clockwise until it click with pit inside.
2 Twist the counter weight clockwise & backward until it reach the white line as figure 2
3 Twist the counter marking until it reach " 1 " position
4 Twist the counter weight anti-clockwise & inward until it reach the appropriate working pressure.
Remark : the working pressure of the provided stylus is from the range 4 – 6 grams. According to the
cartridge manufacturer. All stylus has it own working pressure and please refer to the specification
respectively.

LOCATION OF CONTROLS

2