Operating Guide; Prepare The Remote Transmitter - Petsafe PDT20-10715 Manual De Adiestramiento Y Funcionamiento

Step

Prepare the Remote Transmitter

1
Charge the Remote Transmitter
1. Lift the rubber cover protecting the Remote
Transmitter Charging Jack.
2. Connect one of the charger connectors to the
Remote Transmitter Charging Jack.
3. Plug the charger into a standard wall outlet.
4. Charge the Remote Transmitter for 24 hours for
the fi rst charge. Recharges take only 12 hours.
Note: The Transmitter Indicator Light will fl ash after
12 hours of charging. For the fi rst charge, continue to
charge the Remote Transmitter for an additional 12
hours.
5. When charging is completed, replace the rubber
cover.
Note: Approximate battery life between charges is 40 to 60 hours, depending on frequency of use.
Transmitter Indicator Light - Function and Response
Remote Transmitter Function
Continuous Stimulation or Tone Only
button pressed
Low battery – Any button pressed

Operating Guide

www.petsafe.net
Charger connector placed
in the Remote Transmitter
Charging Jack
Indicator Light Response
Solid in color
Flashes continuously
5