Playback; Adjusting Pictures - Sony SVT-DL224 Manual De Instrucciones

Playback

3
1
2
1
Turn on the power of the equipment to be used.
2
Insert the cassette.
3
Select the playback speed by pressing TAPE
SPEED.
The selected playback speed is displayed in the
display window.
4
Press PLAY z.
Playback starts.
To stop playback
Press STOP p.
To rewind the tape
Press STOP p and then REW 0.
To fast-forward the tape
Press STOP p and then FF ).
Notes
• You may not play back the tapes recorded on other
time-lapse VCR on this VCR and vice versa.
• Play back the tape at the same speed at which it was
recorded so that you can monitor the sound normally.
REW 4 FF STOP p
0 )
Playback speed
You can view the playback picture at one of the
following speeds.
Recording Playback speed (Hour)
speed 8
8 1
24 3
For example, when a tape recorded in 24-hour mode is
played back in 8-hour mode, you can view the
playback picture at a speed 3 times faster than the
recorded one.

Adjusting Pictures

If streaks or noise bands appear on the playback
picture, adjust the tracking condition.
Use TRACKING –/+.
TRACKING –/+
24
1/3
1
23