Terminals; Warning Out Terminal; Tape End Out Terminal - Sony SVT-DL224 Manual De Instrucciones

Terminals

WARNING OUT Terminal

This terminal will help you to know when something
wrong has happened to the VCR during recording.
The VCR outputs a signal from WARNING OUT
terminal.
WARNING OUT terminal
COM terminal
Tape recording stops
Note
To turn the clog detection function off, set CLOG
DETECT to N (no) on the SET UP display.
1
Press MENU until the SET UP display appears on
the screen.
< >
SET UP
REC TAPE END
ALARM DURATION
ALARM SPEED
TAPE IN
OVERWRITE INHIB.
REMOTE
WARNING OUT
CLOG DETECT
2
Press SHIFT b to move the flashing to
WARNING OUT and set to MODE 1 or MODE 2
by pressing DATA '/'.
MODE 1: not including the tape end alarm signal
from WARNING OUT terminal
MODE 2: including the tape end alarm signal
from WARNING OUT terminal
3
Press PAUSE to return to the normal display.
26
5 V
0 V
To reset, press STOP p or
EJECT 6, if the clog detection
function works and the VCR
gives warning, otherwise, press
ALL RESET.
REW
20S
8H
STOP
N
MODE1
MODE1
Y

TAPE END OUT Terminal

When the VCR detects the tape end during recording,
the output level becomes 0 V DC. To resume the 5 V
output, press the operation button (EJECT 6, REC r,
FF ), REW0 or PLAY z, etc.).
COM terminal
TAPE END OUT terminal
REC mode
Tape end
Recording
Rewind
mode
Output
signal
REPEAT REC mode
Tape end
Recording
Rewind
mode
Output
signal
2 sec.
Beginning Press an
of tape operation button.
Stop
5 V
0 V
Beginning
of tape
Recording
5 V
0 V