Malfunctions; Care & Maintenance Instructions - kiwy SPF 1 SA-ATS Manual De Instrucciones

All manuals and user guides at all-guides.com
the car seat.
• Check that the vehicle's seat belt is fully tightened and
the car seat is held firmly against the vehicle's seat.
• Check that the buckle on the child seat safety harness is
correctly locked.
• Check that the chest pads are always in the right position
on your child's body.
• Check regularly all important parts for possible damage.
• Check the correct operation of all components.
• Check that the child seat does not get jammed in the
car door, seat runners, etc., in order to prevent breakage,
damage, wearing etc.
• Even when the car seat has been left fitted in the vehicle,
always check that the vehicle's seat belt is correctly po-
sitioned and tightened before placing your child in the
car seat.
Important: No matter how well a car seat has been desi-
gned, if it is fitted in the vehicle incorrectly then it may fail
to protect your child in the event of an accident.
! Warning! Any child seat tightly fixed on the vehicle
seat may leave signs, due to the measures to be adopted
in compliance with f the Safety Standards. This seat is de-
signed to minimize this phenomenon. The manufacturer
is not liable for possible signs resulting from the normal
use of this seat.
VI. malFunctIons
• In case of incidental dropping or any evident damage,
your child seat must be inspected by the manufacturer.
• Any malfunction of the harness may endanger your child
protection.
• In case of buckle malfunction, do not use this seat and
consult your detailer.
VII. carE & maIntEnancE InstructIons
Warning! Never lubricate any component of your
!
child seat, just keep it nice and clean.
• Plastic parts can be easily cleaned by using just soapy water;
never use solvents, alcohol or any harsh cleaning agents.
• Cleaning: when your cover gets dirty, remove it (see
below) and hand-wash it at 30°; do not use chemical
cleaners; do not machine-wash; do not wring, nor tum-
9