Hardware Contents; Preparation; Assembly Instructions - Task Force 020390 Manual Del Usuario

HARdWARE CONTENTS

Part Description
AA
Carriage Bolt
Plastic Knob
BB
Tree Clip
CC

PREPARATiON

Before beginning assembly of product, make sure all parts are present. Compare parts with
PACKAGE CONTENTS list and diagram above. If any part is missing or damaged, do not attempt
to assemble the product. Contact customer service for replacement parts.
Estimated Assembly Time: 15 minutes
Tools Required for Assembly: None
Helpful Tools: Oil Funnel, Utility Knife
Not Supplied: Garden Hose (50 ft. maximum length), Unleaded Fuel

ASSEMBLy iNSTRuCTiONS

To prepare your pressure washer for operation, you will need to perform these tasks:
1. Fill out and send in registration card.
2. Attach handle and accessory tray to main unit.
3. Add oil to engine crankcase.
4. Add fuel to fuel tank.
5. Connect high pressure hose to spray gun and pump.
6. Connect water supply to pump.
7. Attach nozzle extension to spray gun.
8. Select/attach quick connect spray tip to nozzle extension.
Detailed instructions for steps 2 through 8 begin on the next page.
Quantity Picture (shown to size)
2
2
4
7