Care And Cleaning; Service And Customer Care - Kenwood PG520 Manual De Instrucciones

3 Fit the scroll inside the mincer body.
4 Fit the shaper
15
over the pin.
5 Fit the cone
16
6 Screw the ring nut on.
7 Fit the tray.
8 Switch on. Using the pusher, gently
push your mixture through. Cut into
lengths.
stuffed kebbe recipe
outer casing
500g (1lb 2oz) lamb or fat-free
mutton, cut into strips
500g (1lb 2oz) bulgur wheat,
washed and drained
1 small onion
1 Using the fine screen, mince
alternative batches of meat and
wheat, adding the onion before the
last batch.
2 Mix. Then mince twice more.
3 Push through, using the kebbe
maker (see above).
Filling
400g (10oz) lamb, cut into strips
15ml (1tbsp) oil
2 medium onions, finely chopped
5-10ml (1-2tsp) ground allspice
15ml (1tbsp) plain flour
salt and pepper
1 Using the fine screen, mince the
lamb.
2 Fry the onions until golden brown.
Add the lamb.
3 Add the remaining ingredients and
cook for 1-2 minutes.
4 Drain off any excess fat and allow to
cool.
To finish
1 Push the casing mixture through,
using the kebbe maker.
2 Cut into 8cm (3") lengths.
3 Pinch one end of the tube to seal it.
Push some filling – not too much –
into the other end, then seal.
4 Deep fry in hot (190˚) oil for about 6
minutes or until golden brown.
– put the notch
.

care and cleaning

power unit
Wipe with a damp cloth, then dry.
mincer attachment
1 Loosen the ring nut manually or with
the spanner
all the parts in hot soapy water, then
dry. We don't recommend
dishwasher washing. Never use a
soda solution.
2 Re-assemble.
3 Wipe the screens with vegetable oil,
then wrap in greaseproof paper to
prevent discolouring/rusting.
4 If you keep the mincer on the
machine, put the dish/cover on the
tray as a dust-cover.
5 You can pull the lid off the pusher
and store the sausage and kebbe
attachments inside.
service and customer
care
If the cord is damaged it must, for
safety reasons, be replaced by
Kenwood or an authorised Kenwood
repairer.
UK
If you need help with:
using your machine or
servicing, spare parts or repairs (in or
out of guarantee)
call Kenwood on 023 92392333
and ask for Customer Care. Have
your model number ready – it's
on the underside of the power unit.
Alternatively, contact your authorised
Kenwood repairer: look in YELLOW
PAGES under 'Electrical appliance
repairs'.
Eire
See our advertisement in Golden
Pages.
other countries
Contact the shop where you bought
your machine.
6
and dismantle. Wash