Soundoff Signal mpower EMPS2QM Serie Manual Del Usuario página 7

with Clear Duty™ Technology
FUNCTION TABLES
Changing the function table is only enabled when the LED module is in a flashing mode (disabled in cruise or steady ON functions). The functional operation of the LED module can be changed while applying the +V to the Red wire with the black wire
connected to ground. When the light is flashing, momentarily connect the White wire to ground for >4S and <5S (light will go steady high, steady low, off, steady high, steady low) then release. The function table will now advance to the next table (table 1
to table 2, table 2 to table 3, or table 3 to table 1). Repeat above process until required function table is active.
FUNCTION TABLE 1
WIRE
RED R/W WHT
+9-32V
+9-32V
+9-32V +9-32V
+9-32V
+9-32V +9-32V
+9-32V +9-32V
+9-32V +9-32V +9-32V
FUNCTION TABLE 3
WIRE
RED R/W WHT
+9-32V
+9-32V
+9-32V +9-32V
+9-32V
+9-32V +9-32V
+9-32V +9-32V
+9-32V +9-32V +9-32V
1.800.338.7337 / www.soundoffsignal.com
7
®
LIGHT
SINGLE DUAL
FLASH FLASH DUAL FLASH TRI
CRUISE STEADY CLR 2 STEADY CLR 3
FLASH STEADY CLR 2 STEADY CLR 3
NO OP NO OP
LOW PWR FLASH FLASH CLR 1 FLASH CLR 1
FLASH CLR 2
CRUISE FLASH CLR 2
FLASH CLR 3
LOW PWR FLASH FLASH DUAL
LIGHT
SINGLE DUAL
FLASH FLASH DUAL
FLASH DUAL LOW FLASH TRI LOW PWR
FLASH LOW PWR
PWR
FLASH DUAL LOW FLASH TRI LOW PWR
FLASH LOW PWR
PWR
NO OP NO OP
FLASH DUAL LOW FLASH TRI LOW PWR
FLASH LOW PWR
PWR
FLASH DUAL LOW FLASH TRI LOW PWR
FLASH LOW PWR
PWR
FLASH DUAL LOW FLASH TRI LOW PWR
FLASH LOW PWR
PWR
WIRE
TRI RED R/W
+9-32V
+9-32V
+9-32V
NO OP
+9-32V
+9-32V +9-32V
TRI
FLASH TRI
NO OP
FUNCTION TABLE 2
LIGHT
WHT SINGLE DUAL
FLASH FLASH CLR 1
+9-32V CRUISE FLASH DUAL
STEADY CLR 1 STEADY CLR 2
+9-32V STEADY CLR 1 STEADY CLR 2
+9-32V STEADY CLR 1 STEADY CLR 2
+9-32V NO OP NO OP
TRI
FLASH DUAL
FLASH TRI
STEADY CLR 3
STEADY CLR 3
STEADY CLR 3
NO OP
mPOWER 9.16