TROUBLESHOOTING
PROBLEM
Vanity doors rub
against another
surface.
There is a large
uneven gap between
the vanity doors and
cabinet.
There is a gap
underneath the
vanity.
Vanity top wobbles
when placed on the
vanity base.
WARRANTY
All products should be checked for defects or damages prior to installation and any defects or
damages should be notified to the manufacturer.
What This Warranty Covers:
The manufacturer warrants its products to be free from substantial defects in materials and
workmanship from the original date of purchase under normal home use. This warranty is offered only
to the original consumer purchaser and may not be transferred. The manufacturer is only responsible
for the actual purchase price.
How Long The Warranty Lasts:
Coverage for all vanity cabinets, fixed vanities, drawer banks, bath storage cabinets, linen cabinets,
wall hutches, fillers, toe kicks, medicine cabinets, mirrors, and accessories lasts from 3 years from
the original date of purchase. Coverage for all porcelain vanity tops lasts from 1 year from the original
date of purchase.
POSSIBLE CAUSE
Floor is not level.
Floor is not level.
Shipping feet are still
attached.
1. The vanity base is not
installed level and
plumb.
2. The under side of the
vanity top is uneven: this
can be a common
occurrence in porcelain
tops due to the
manufacturing process.
CORRECTIVE ACTION
Use a shim to ensure the vanity is level.
Use a shim to ensure the vanity is level.
See Step 1 in Assembly Instructions.
1. Ensure the vanity base is level and plumb.
It may be necessary to use shims if the
base sits uneven (see Step 3 in Assembly
Instructions).
2a) Identify which corners have the wobble.
2b) Carefully remove the vanity top and turn
it over.
2c) Apply the bumpers (CC) adhesive side
down on the corners of the vanity top
that you identified in Step 2a.
2d) Carefully place the top back onto the
vanity base and make any necessary
adjustments to the bumper placement(s)
until the top does not wobble.
6