Care And Maintenance; Troubleshooting - Style selections 47895 Instrucciones De Montaje

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

CARE AND MAINTENANCE

• To maintain the beauty of the mirror finish, avoid placing the mirror in direct sunlight.
• Avoid exposing the mirror to extreme temperatures by installing away from heat and air vents.
• Dust frequently with a clean, soft and dry cloth.

TROUBLESHOOTING

PROBLEM
Mirror is higher on
one side than the
other.
WARRANTY
All products should be checked for defects or damages prior to installation and any defects or
damages should be notified to the manufacturer.
What This Warranty Covers:
The manufacturer warrants its products to be free from substantial defects in materials and
workmanship from the original date of purchase under normal home use. This warranty is offered only
to the original consumer purchaser and may not be transferred. The manufacturer is only responsible
for the actual purchase price.
How Long The Warranty Lasts:
Coverage for all vanity cabinets, fixed vanities, drawer banks, bath storage cabinets, linen cabinets,
wall hutches, fillers, toe kicks, medicine cabinets, mirrors, and accessories lasts from 3 years from
the original date of purchase. Coverage for all porcelain vanity tops lasts from 1 year from the original
date of purchase.
What The Manufacturer Will Do Under The Warranty:
During the warranty period, the manufacturer, at its option, will repair or replace any part or product
that proves to have substantial defects in materials or workmanship, or the manufacturer will provide
an equivalent replacement product. The manufacturer reserves the right to change specifications in
design and materials without notice and with no obligation to replace products that were previously
manufactured.
Implied Warranties:
The manufacturer disclaims any implied warranty of merchantability, and there are no warranties that
extend beyond the descriptions on the face hereof.
Wood, Aging and Appearing in Printed Materials:
Because of the varying natural characteristics of wood and the effects of aging, product shown in
POSSIBLE CAUSE
1. Mounting screws are not level.
2. Hanging hardware on the mirror
is not level.
CORRECTIVE ACTION
1. Remove the mirror from the wall and
re-check the screws; adjust as
needed.
2. Measure the position of the hanging
hardware on the back of the mirror
and ensure that it is level, adjust as
needed.
5

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

0120957

Tabla de contenido