Style selections LT2026WWMV Manual Del Usuario página 7

4.
Attach trim piece (C) to cabinet body (E) with large
screws (II).
NOTE: Finished edges of cabinet body (E) face away
from wall.
Hardware Used
II Large Screw
5.
Fasten mounting plates (AA) to cabinet body (E) using
mounting plate screws (BB) with the long side of mounting
plates (AA) pointing to the front of the cabinet body (E).
NOTE: Do not overtighten mounting plate screws (BB).
Hardware Used
AA Mounting Plate
BB Mounting Plate Screw
6.
Insert screw caps (GG) into each exposed screw head.
NOTE: Wall mounting is recommended. Hold the cabinet
body (E) in the desired position. Using the pre-drilled
holes in hanging rail, insert wood shims (not included)
between wall and cabinet body (E) until snug.
Place sink basin (A) into cabinet body (E) and check
for proper clearance. With sink basin (A) removed,
attach cabinet body (E) to wall using appropriate
mounting hardware (not included).
Hardware Used
GG Screw Cap
4
E
x 2
5
x 4
x 8
6
E
x 24
7
C
AA
BB
GG
GG
IS2626