Vacant Channel Scan; Nuisance Delete; Licensing And Service Information - Maxon SP - 150 Serie Instrucciones De Operation

the priority call. After the priority call has ended, the radio
remains on the priority channel for the scan wait time.
When look back time expires, the radio will go back
to the selected channel and resume priority look back
operation.
TX: The radio will only transmit on the selected channel.
While transmitting, all receive operations will be disabled.
Transmission will be allowed on the priority channel only
after receiving a priority call.

Vacant Channel Scan

RX: Conventional operation on the selected channel occurs.
TX: The radio will step through the scan list and transmit
on the first non-busy channel.

Nuisance Delete

If a channel contained in the scan list is constantly being
scanned because of unwanted "chatter", you can tempo-
rarily delete the channel from your list by pressing the
appropriate option button, (usually the monitor button).
Nuisance delete can only be initiated when scan is active
and the radio has finished receiving the call on the channel
to be deleted. Nuisance delete can be deactivated for all
channels by turning scan off.

Licensing and Service Information

FCC Licensing
The Federal Communications Commission requires the
operator of this radio be properly licensed under the appli-
cable Part and/or Parts of the FCC Rules and Regulations.
Consult with your Maxon Dealer, or contact the nearest FCC
field office for information about obtaining a license.
16