Rinse Aid - Kenmore 587.1401 Manual De Uso Y Cuidado

Dishwasher Dispenser Dishwasher Dispenser
Dishwasher Dispenser Dishwasher Dispenser Dishwasher Dispenser
& Deter & Deter & Detergents gents gents gents
& Deter & Deter gents

Rinse Aid

Rinse Aid Rinse Aid
Rinse Aid Rinse Aid
Rinse aid greatly improves drying and reduces
water spots and filming. Water "sheets" off
dishes rather than forming water droplets that
cling and leave spots.
A dispenser, located next to the detergent cup,
automatically releases a measured amount of
rinse aid during the last rinse. If spotting and poor
drying are problems, increase the amount of rinse
aid dispensed by rotating the dial to a higher
number. The dial is located under the dispenser
cap. The indicator will be dark when full and will
show clear when it is time to refill.
To add liquid rinse aid, turn dispenser cap 1/4 turn
counterclockwise and lift out. Pour in rinse aid until
liquid touches the indicated fill level. Replace cap.
Do not overfill since this can cause oversudsing.
Wipe up any spills with a damp cloth.
The dispenser holds enough for 35 to 140 washes,
depending on setting.
Dispenser Opening
Less
Dispenser Cap
The HEAT DRY option in combination with rinse
aid will give you excellent drying results. The
energy to use HEAT DRY costs pennies per
cycle. You may turn off the HEAT DRY option,
however you will have items in your dish load
that will not be dry at the end of the cycle.
(continued) (continued) (continued)
(continued) (continued)
Indicator
More
Adjustable setting
Factors Af Factors Af
Factors Af Factors Af Factors Affecting
Per Per Perfor for for formance mance mance mance
Per Per for mance
W W W W W ater Pr ater Pr ater Pr essure e e e e essur essur
ater Pr ater Pressur essur
The hot water line to the dishwasher must provide
water pressure between 20 and 120 psi.
Low water pressure may occur when laundry or
showers are in operation. Wait until water use is
reduced before starting dishwasher.
W W W W W ater T ater Temperatur ater T ater T emperatur emperatur emperature e e e e
ater T emperatur
Hot water is needed for best dishwashing and
drying results. Water entering dishwasher should
be at least 120°F (49°C) to give satisfactory
results.
To check water temperature entering dishwasher:
• Turn on hot water faucet nearest dishwasher
for several minutes to clear cool water from
pipes.
• Hold a candy or meat thermometer in stream
of water to check the temperature.
• If temperature is below 120°F (49°C), have a
qualified person raise the hot water heater
thermostat setting.
Important: Before starting a cycle, run hot
water through faucet to clear cool water from
pipe.
9
fecting fecting
fecting fecting