System Testing; Reassembly - Mopar 82209702 Instrucciones Para La Instalación

Security Function Checklist
SECURITY SYSTEM ARM / DISARM
USING FACTORY RKE KEYFOBS
VERIFY INTERIOR DOOR TRIM UNLOCK SWITCH DOES NOT DISARM SYSTEM
ALL ENTRY POINTS TRIP ALARM CYCLE
STATUS INDICATOR FLASHES WHEN ARMED
SHOCK SENSOR SETTINGS (LITE-TOUCH & FULL SHOCK)
PROGAMMING/OVERRIDE BUTTON DISARMS SYSTEM WITH IGNITION ON

Reassembly

Component mounting
A. Mount security module to existing underdash braces or wire harnesses
using the supplied wire ties. Avoid moving parts (steering column, brake
pedal assembly, etc.).
B. Using supplied wire ties, secure the security module harness to existing
wire harnesses under the left side of the dash. Ensure no wires will become
entangled in the steering column knuckle and that they are not visible to
vehicle occupants.
C. Using a supplied wire tie, secure the programming/override button to the
harness leading to the vehicle's diagnostic connec-
tor. Consistency in mounting this switch in the
same place every time will make it easier to find in
case the system comes back for service. Also,
the dash will not have to be disassembled to ac-
cess it. Ensure that the placement of the pro-
gramming/override button is indicated in the
Owner's manual and the customer knows
where it is located and can access it...
Dash reassembly
A. Reverse the dash dissassembly procedure.
13