Vehicle Preparation - Mopar 82209702 Instrucciones Para La Instalación

Overview
The security module harness will interface with the existing ignition switch connec-
tor, horn, parking lights, power doorlock & door trigger connections and a ground
termination.

Vehicle Preparation

Remove driver's side lower dash
panels, black plastic dash panel &
steering column shroud.
A. Remove (2) screws under lower
dash. Top of panel is held by
clips. Remove panel.
B. Remove (4) screws from black
plastic panel below steering
column. Remove panel.
C. Remove (3) screws from steering
column shroud. Separate and
remove steering column shroud.
D. Lift front of driver's step sill plate to
remove left kick panel. Panel is
held on by clips.
4