GE ASH18 Manual Del Propietario E Instrucciones De Instalación página 14

Window Installation Instructions.
8
Install the Security Bracket and the Foam Top Window Gasket
Attach the security bracket with a type B screw.
A
9
Install the Air Conditioner in the Case
Slide the air conditioner into the case.
A
Reinstall the 2 screws removed earlier on
each side of the case.
Place the bottom inner case gasket between
B
the bottom of the air conditioner and the
inside bottom of the case. Fold up the ends
on both sides and push them in.
Front of air
conditioner.
14
Bottom inner
case gasket
Cut the foam top window gasket to the
B
window width.
Stuff the foam between the glass and the
C
window to prevent air and insects from
getting into the room.
Attach the front grille to the case by inserting
C
the tabs on the grille into the slots on the
front of the case. Push the grille in until it
snaps into place.
Guide the lever carefully
through the grille as you
push it in.
Secure the front grille to the case by replacing
D
the screw removed in Step 3A. If a screw was
not removed in Step 3A, secure the grille with
a Type D screw for models with a raise-up inlet
grille, or 1 or 2 Type D screw(s) for models
with a slide-out filter.
The installation is now complete.