Setting The Time And Date Manually - ADE WS 1822 Instrucciones De Operación

2. Restart reception manually, see "Manually starting
signal reception".
3. Wait until the base station automatically switches
back to reception at a later time. The reception is
usually better at night.
4. Manually perform the settings if reception is not
possible at your location, see "Setting the time and
date manually".
No data display from the wireless outdoor sensor
1. Check whether you have inserted the batteries
correctly.
2. Check whether the location of the wireless outdoor
sensor is suitable, see "Choosing a location".

Setting the time and date manually

If there is more than approx. 8 seconds between
two pushes of a button, the setting process
automatically ends and you will have to repeat it.
1. Press and hold down the SET button until "00" flashes
on the display.
2. Use the
most countries in Europe, "00" is the correct setting).
3. Press SET.
4. Proceed as previously described:
Weather Station with Wireless Outdoor Sensor WS 1822
/ buttons to select your time zone (for
51