Ideal Vol-Con XL Manual De Instrucciones página 3

ND 3401-1 61-085/086 Vol-Con In
• Verify tester operation by measuring a
known voltage. Apply tester to circuit
under test. And, then test on the
known live voltage again to ensure
proper operation.
• Connect the black common lead to
ground before applying the red test lead
to voltage. Disconnect the red test lead
from the voltage first.
• Always work with a partner.
• When using the probes, keep fingers as
far behind the probe tips as possible.
Features:
• Vibration Mode w/indicator movement
• Audible and LED Indication of Voltage
Levels (61-085 has LED indication only).
• Auto-Switching Voltage/Continuity
Technology (61-086 only)
• Independent solenoid and electronic cir-
cuitry design provides back-up voltage
indication for added safety.
• Low Impedance Measuring Device
• Replaceable Test Leads
• Shielded probe tips
• Ultrasonically welded and o-ring sealed
for added durability
Accessories:
• TL-82 Resistor-fused test leads
• C-90 Soft-sided carrying case
To Measure AC Voltage:
• Ensure that the plug for the test leads is
fully seated into the banana jacks.
• Connect the tester in parallel with the
1/9/07 4:29 PM Page 3