Kolcraft Contours Options Hoja De Instrucciones página 8

Seat Housing Slot
4 & 5
1 & 2
Release Button
To Attach Seat
Seat Post
3 & 4
Release Button
Seat Lock Tab
To Attach Front Tray
WARNING
DO NOT Place car seat in stroller
seat. Car seat will not be secure.
Place stroller upright with all 4 wheels on
1
the ground.
Pick up seat by seat frame and place
2
seat in either forward or reverse position.
Align posts with seat housing slots as
3
shown.
Press seat down until a "click" is heard
4
on both sides. Pull up on seat to make
sure it is secured to stroller frame.
NOTE: You can tell if seat is locked in
place by looking at square window on
side of seat housing slot. If a red tab
appears in that window, seat is locked.
To reverse seat, push in release buttons
5
located on both sides of seat frame, lift
up and reverse seat direction.
To prevent injury to your child, take
care when inserting tray into frame.
Align tray into holes located on seat
1
frame.
Snap tab in place until a click is heard.
2
Repeat for second side.
3
TO ROTATE OR REMOVE TRAY: Push
in release button located near side
housing and pull tray out. Repeat on
other side, to remove tray completely.
8
CAUTION