Crouzet 87 620 Manual Del Usuario página 50

87 620
p p p
TERMINAL DESCRIPTION
1 - Auxiliary power supply providing 12-24 volts dc only in ac voltage
version to actuate pulse generators up to 50 mA.
Note: For the dc power supply, this terminal is used for the direct current
positive input.
2 0 Volt or common - for use with the sensor power supply, inputs A, B and
C, and solid-state outputs 1 and 2
3 Input A (see the Role of counting and control inputs parameter)
4 Input B (see the Role of counting and control inputs parameter)
5 Input C - Programmable for use as a 0 reset input or gate (see Role of
counting and control inputs parameter)
6 Solid-state output provides a PNP output signal
7 Changeover output 1: NC
8 Changeover output 1: NO
9 Changeover output 1: Common
10 Alternating current input - neutral (not wired for dc power supply
products)
11 Alternating current input - line (not wired for dc power supply products)
12 Do not connect
13 Solid-state output provides a PNP output signal
14 Do not connect
15 Changeover output 2: NC
16 Changeover output 2: NO
17 Changeover output 2: Common
50/231 12 - 2005