Crouzet 87 620 Manual Del Usuario página 76

87 620
p p p
PARAMETERS
Duration of the
output signal
OUT1
Duration of the
output signal
OUT2
Operation of
OUT2 on an
intermediate
reset
Logic of NPN or
PNP inputs
Maximum input
frequency
Static or
dynamic reset
Saving of
outputs OUT1
and OUT2
Reset input
Batch counter
or second
preselector
Reset
interlocking by
keys (6 + 4)
76/231
VALUES
)
*
*
/ - )
/ -
 )  
*
 ) 
 )  
 ) 
- , 
*
- , 
*
- ! *
- " .
*
   )
  
*
 -  )
 - ! 
*
!  ! 
!  . *
*
- / ) 
-  * "
DESCRIPTION
- No output signal
- Bistable output
- 20 ms
- 50 ms
- 100 ms
- 200 ms
- 500 ms
- 1 s
- Same as OUT1
- No transmission (if external reset before P2
is reached, the output is not activated)
- With transmission OUT2 on a reset (In the
event of a reset on OUT2 the output is
activated)
- HTL inputs for NPN (sensitive to a level "0"
y c 2 V and "1" u c 8 V)
- HTL inputs for PNP (sensitive to a level "0"
y c 2 V and "1" u c 8 V)
- TTL inputs for NPN (sensitive to a level "0"
y c 2 V and "1" u c 3.8 V)
- TTL inputs for PNP (sensitive to a level "0"
y c 2 V and "1" u c 3.8 V)
- Attenuation at 30 Hz (to avoid contact
bounce being taken into account)
- No attenuation (5 KHz or 2.5 KHz if two-way
counting)
- Static: no counting during resetting time
- Dynamic: counting possible during resetting
time
- No saving of output states in the event of a
power cut
- With saving of output states in the event of a
power cut
- Only resets the preselector
- Only resets the batch counter
- Batch counter
- Second preselector
- Manual reset possible
(keys 6 + 4)
- Reset by keys, interlocked or delayed (see
Interlocking mode parameter)
12 - 2005