Alarm; General Information; Setting Alarm Time And Making Further Settings - ADE CK 1718 Instrucciones De Operación

Alarm

Alarm

General information

‚ You can use three different alarm sources to wake up:
− Natural sounds
− Buzzer
− Radio
‚ The alarm sources have adjustable volume (except for buzzer).
‚ The light will switch on 30 minutes before the set alarm time to simulate a sunrise.
Alternatively, you can wake up to a coloured mood light.
‚ You can adjust manually the brightness of the sunrise simulation and/or the mood
light.

Setting alarm time and making further settings

‚ If there is more than approx. 30 seconds between two pushes of a
button, the setting process automatically ends and you will have to
repeat it.
‚ Press and hold down the
the displayed values.
‚ If you do not want an additional wake-up light, select "L 00" as the
brightness level for the following light settings.
The device must be in the normal clock mode (no radio playback).
1. Use the left
source.
2. Press and hold the
alarm time flashes.
3. Use the or
4. Press to confirm the setting.
The wake-up minute will flash on the display.
5. Use the or
6. Press to confirm the setting.
The subsequent procedure depends on the selected alarm source.
32
slide switch on the back of the device to select the desired alarm
button for a few seconds until the hour indication of the
button to set the desired wake-up hour.
button to set the desired wake-up minute.
or button to speed up the progress of
Wake-Up Light CK 1718