Cleaning; Fault/Remedy; Declaration Of Conformity - ADE CK 1718 Instrucciones De Operación

Repeat alarm (snooze function)
− Press
once when the alarm signal sounds.
The alarm signal will be muted and Z
8 minutes, the device switches on again and wakes you up again.
This procedure can be repeated multiple times.
Turning the alarm off completely
− Set the right slide switch on the back of the device to .
The alarm symbol
disabled.

Cleaning

1. Disconnect the USB power adapter from the base station.
2. Wipe clean the device with a slightly damp cloth, if necessary.

Fault/Remedy

Fault
Some functions are not available.
The wake-up light will go on immediately
after setting and enabling an alarm time.

Declaration of Conformity

Waagen-Schmitt GmbH hereby declares that the wake-up light CK 1718 complies with
EU directives 2014/53/EU and 2011/65/EU.
The full text of the EU conformity declaration is available via the following Internet
address: www.ade-germany.de/doc
This declaration loses its validity if any modification is made to the item that has not
been agreed with us in advance.
Hamburg, April 2018
Waagen-Schmitt GmbH
Wake-Up Light CK 1718
will appear flashing on the display. After
Z
will disappear from the display and the alarm function will be
Possible Cause
‚ Operate the device via the supplied USB
cable to be able to use all functions.
‚ The alarm time is within the next
30 minutes. No fault. As a remedy, set
"L 00" as the brightness level when
awakening, if necessary (light function
is disabled).
Cleaning
35