Emerson White-Rodgers F145RF-1600 Instrucciones De Instalación página 3

CONFIRM WIRELESS DEVICES ARE COMMUNICATING
1
At the Comfort Interface, press the Menu button once
and release.
Equipment Control
(Required)
Remote Sensor 1 (if installed)
NOTE
( )
Battery icon shows battery
status for each remote.
4
Press the Run button to return to Home screen.
Press the Connect button once and release. Comfort
2
Interface display will indicate "Searching" until
(CTL) control and wireless icon are found. If no
communication, it will show "Failed."
(see Troubleshooting below)
Press the Next button once, RS-1 (Remote sensor)
3
should be displayed if a remote sensor is installed.
Temperature displayed is the temperature at the
remote sensor. Press Next again to confirm additional
sensor(s) RS-2, RS-3, ORS-4 (outdoor), RAS.
Sensor Number
Remote Sensor 2 (if installed)
Outdoor Remote Sensor (if installed)
Remote Sensor 3 (if installed)
Return Air Sensor (required)
3