KTM 60312964044 Manual De Usario página 5

2
1
6
7
5
5
6
2
1
3
Scope of supply:
1x heated grip, left (1)
1x heated grip, right (2)
1x screw M4x10
The ignition must be switched off during installation.
Preassembly
4
- Remove the headlight mask (see the Owner's Manual).
- Remove the hand guards (4) on both sides.
Assembly
- Remove the original grip on the left.
5
- Loosen the screws (5).
- Open the switch housing (6).
- Remove the original grip (7) on the right.
5
- Position the right heated grip (2) in the switch housing (6).
- Assemble the switch housing (6) and screw it together with screws (5).
5
5
5
5
- Position the left heated grip (1) and screw it onto the handlebar from below
with screw M4x10 (3).
60312964010
60312964020
5