6.5 HOLD
6.5.1 HOLD function
This function is used to 'freeze' the measurement result on the
display. To do this, briefly press HOLD
tion is enabled, the display shows symbol HOLD.
To return to the normal operation mode of the device, press
▼ button again.
HOLD
6.5.2 Wireless communication
The multimeter is equipped with a wireless data transfer mode
for devices with installed Sonel Multimeter Mobile software. To
enable the mode, long press HOLD
visible in the Bluetooth manager of any receiver device as
CMP-3kR.
Details of cooperation with the mobile application are provided
in Sonel Multimeter Mobile manual.
6.6 Deleting data in the memory of the meter
In order to delete data from the memory of the meter:
enter the SETUP mode (sec. 6.2.2),
press and hold LOG SEND button until you hear a beep,
exit the SETUP mode.
▼ button
CMP-3kR – USER MANUAL
▼ button. When the func-
▼ button. The meter will be
35