Instructions For The Installer; Data Plate; Certification; Installation - Preliminary Operations - Unox CaldoLux XHC030 Manual Istruciones Y Datos Tecnocos

ENGLISH
I. INSTRUCTION FOR
THE INSTALLER
Dear Customer, we would like to thank you and
congratulate you on the purchase of one of the
UNOX products. The instructions and suggestions
that follow concern the phases of a proper
installation, as well as the use and maintenance for
your safety and for the best use of the appliance.
1.

DATA PLATE

2.

CERTIFICATION

The "CE" brand you find on the appliances included
in this instructions manual refers to the following
directives:
ELECTRIC STATIC OVENS - SERIE XCH :
- Low Tension Directive
DBT 73/23/CEE e 93/68/CEE,
according to rule EN60335-1: 2001 e
according to rule EN60335-2-36: 2002
- Electromagnetic Compatibility Directive,
according to rule EN60555-3, EN55014 and
EN55104.
3. INSTALLATION – PRELIMINARY OPERATIONS
All the electrical connections and installations must
be done by qualified personnel according to actual
laws.
3.1 CHECK OF THE INSTALLATION LOCATION
Before placing the appliance, please verify the
overall measurements and the exact position of the
electrical connections looking at the pictures on the
attached file "TECHNICAL DATA".
3.2

POSITIONING

Place the appliance respecting the safety standards
in force that you find here following described:
1.
Place the appliance so that its back and
sides can be easily reached in order to make
electrical connections and provide the needed
service.
2.
The appliance is not suitable for built-in
installation and side by side positioning.
3.
It is suggested to leave a distance of 10 cm.
between the back of the oven and the wall
behind the appliance.
All the models must be placed upon a support, for
example a metal table.
Do not ever install the appliance on the floor.
If the appliance is placed near walls, dividers, kitchen
cabinets, decorated edges, etc., it is recommended
that this be of non combustible material.
Otherwise, they must be coated with non combustible
thermal insulating material and you must be very
respectful of the fire prevention standards.
3.3.

REMOVAL OF THE PROTECTIVE FILM

Carefully remove all the protective film from the
external walls of the appliance. Pay attention not to
leave any rest of glue on the sides. If there should be
UNO
R
ENGLISH
3