Installation - Electrical Connection; Reversal Of The Door - Unox CaldoLux XHC030 Manual Istruciones Y Datos Tecnocos

UNO
any residue, please remove it with an appropriate
solvent.
4. INSTALLATION – ELETTRICAL CONNECTION
a- The connection to the electrical power supply
system must be done according to the standard
in force.
Before connecting the appliance, make yourself
sure that the voltage and the frequency
correspond to those stated on the data plate of
the appliance.
The appliance must be placed so that the
connection plug to the network can be easily
reached.
Place an omni-polar switch between the
appliance and the network. The omni-polar
switch must have the following characteristics:
- must be easily reached after the
installation;
- the contacts of the switch must have a
minimum opening distance of 3 mm;
- must have an appropriate input (for
example, magneto-thermal switch.
When the appliance is working the power supply
voltage must not diverge from the value of the
nominal voltage, written on the technical data
plate, by more than ± 10%.
b- The appliance must be connected to the ground
line of the network.
Moreover, the appliance must be included in
equipotential system whose efficiency must be
properly checked according to the current law.
This connection
be done between the
different appliances using
the terminal marked with
the symbol:
ENGLISH
4
R
must
The equipotential conductor must have a minimum
section of 10 mm 2
5.

REVERSAL OF THE DOOR

To meet the customers' need, the appliance
is equipped with a reversible door. With this
characteristics, the user can choose, at any time, on
which direction he/she wants to open the door.
Needed equipment:
• Medium size screwdriver with Philips driver;
• Small size screwdriver with Slotted driver
Procedure:
1. Disconnect the appliance from the electrical power
supply and wait for the appliance to cool down.
2. Remove eventual trays containing food from the
cavity.
3. Lay the oven on the side so that the fulcrum of the
door is on the top (see following picture).
4.
With the screwdriver with Philips driver, unscrew
anticlockwise both the screws that fix the stirrup
(see following picture).
ENGLISH
.