Air Filter - DUO-FAST 903000 Manual De Instrucciones

Make certain magazine mounting screws are tight and
magazine is tight to nose. Attempting to fire tool with a
loose magazine will result in loss of nail control, damage
to tool, or nail discharge toward operator.

Air Filter

Open the grille by pressing slightly above the adapter, and
pivoting the cover open. The air filter simply lifts out.
Tap the filter GENTLY to remove any dust. Check and clean
the air filter every two days. Soap and water restores the
filter to a "like new" condition.
End-of-Workday Routine
At the end of each workday, conduct an end-of-workday
routine. These simple steps are based on maintaining the
safety and operational efficiency of the Duo-Fast Cordless
Framing Nailer.
Before you leave the work site:
1. Remove battery and store in tool case. Always use the
Cordless Framing Nailer case for transporting and
storing the tool.
2. Dispose of all empty fuel cells. Remember to dispose of
these cells where they will not be found by children,
crushed, punctured, or burned.
WARNING
Grille
Filter
When you get home:
1. Place the battery in its charger if it needs charging as
indicated by the red charge light on the handle.
2. Wipe your Cordless Faming Nailer with a clean, soft
cloth.
3. Remove and clean the filter every two days.
Cordless Faming Nailer Cordless Tool
Accessories
A variety of accessories are available for the Duo-Fast
Cordless Framing Nailer:
No-Mar Work Contacting Element - Part No. 903033
Battery - Part No. 902336
Clear Safety Glasses - Part No. 401382
Duo-Fast Lubricating Oil - Part No. 902331
Tool Cleaner - Part No. 219348
Battery Charger Kit - Part No. 902327
Wall Mount Transformer Only - Part No. 902302
Battery Charger Base Only - Part No. 902301
Duo-Fast Cordless 20 ° Framing Nailer Case - Part No.
903032
Automotive Adapter - Part No. 902333
Contact your Duo-Fast representative for additional
information.
Tools
A 5/32 Hex Socket Wrench (Part No. 401331 ) is provided
with each Duo-Fast Cordless Framing Nailer.
Servicing
17