Cylinder Head - Paslode 30 Manual De Instrucciones

Cylinder Head

Step 1
Grasp the Cylinder Head O-Ring with the thumb and
index finger of one hand, and pull the O-Ring out of
the groove slightly by applying light pressure while
pulling.
Step 2
Grasp the protruding portion of the O-Ring with the
other hand, and gently pull the O-Ring out of the
groove and over the fan. Wipe the O-Ring clean with
a soft, lint-free cloth. Spray degreaser cleaner on the
cloth to help remove any sticky residue from the
O-Ring.
Step 3
Spray the Cylinder Head with degreaser cleaner.
Allow the dirt and debris to drip off. DO NOT LET
OVER SPRAY OR DIRTY CLEANER RUN INTO
THE HANDLE!
3