Paslode 30 Manual De Instrucciones página 7

Step 7
Tilt the Motor Assembly upright, and apply 3-4
drops of Paslode Cordless Lubricating Oil evenly
spaced around the top of the Combustion Chamber
(Area "C"). Spread the oil using your fingertip.
Step 8
Reassemble the Paslode Cordless Framing Nailer
following disassembly Steps 1-3, page 2 in
Reverse order.
Do not attempt to operate the tool unless the head
screws, filter and cap are securely attached to the
housing. Operating the Paslode Cordless Framing
nailer with loose or missing head screws can result
in the escape of burning gases, tool damage, and
injury to tool user and property.
NOTE: After the tool is completely
assembled and all screws are
tightened, test the tool for proper
operation. Some smoke may be
noticeable from the exhaust ports
on the first few cycles as excess
oil is burned off. Consult the
Operating Manual for instructions if
the tool malfunctions.
DANGER
Combustion
Chamber
Assembly
"Mid-Check"
Sleeve
Piston
Area
Motor Assembly
7