Paslode 30 Manual De Instrucciones página 4

Cylinder Head
Step 4
Using a clean, lint-free rag, wipe off any remaining
cleaner or dirt. Make sure the O-Ring Groove and
Spark Plug are completely clean and clear of debris.
Repeat Step 3 to remove any heavy deposits or
remaining residue.
Step 5
Reinstall the O-Ring, and thoroughly lubricate with
Paslode Cordless Lubricating Oil, part #401482.
Make sure oil is applied evenly around entire O-Ring.
Set the Handle/Cylinder Head Assembly aside.
Note:
Paslode Cordless Lubricating Oil is specially
formulated for use in the Paslode Cordless Framing
Nailer. The use of other types of lubricants may
cause rapid build-up of combustion residue or result
in premature part failure.
4