Lega 5409T Manual Del Usuario página 13

Operation
Arrange the honeycombs so that they are balanced inside the cage;
Close the semi cover;
Connect the extractor to the power supply.
The toggle switch next to the electrical panel is on 0, STOP;
Place it on 1 to start the rotation in one direction, place it on 2 to start the
rotation in the opposite direction.
Turn the potentiometer until the correct speed has been obtained in relation to
the load of the extractor.
Costruzioni Apistiche – via Maestri del Lavoro 23 – 48018 Faenza
www.legaitaly.com - Tel 054626834 – Fax 054628279 – P.iva 00043230390
After a few seconds the cage
will start to rotate, following a
controlled acceleration ramp,
until reaching of the chosen
speed;
The electronic board automatically manages deceleration to '0' turns and
subsequent acceleration to the speed set by the potentiometer.
13 / 38