Prostat PRS4110 Manual De Usuario página 5

5
Attach Thermostat to Sub-Base
1. Line up the thermostat body with the sub-base.
2. Carefully push the thermostat body against the sub-base until it snaps
into place.
3. Insert quick reference card into slot on top of thermostat.
3 Setting User Options
Advanced User Options
User options allow you to customize some of your thermostat's features.
Most users will not need to make any changes to the settings in this section.
To enter the User Options menu, hold down the RETURN button for
approximately 3 seconds until the screen changes and displays the
first User Option. Press the
displayed User Option. After you have made your desired setting, press
RETURN to advance to the next User Option. The thermostat will return to
normal mode after your last user option is made or after no keys have been
pressed for 15 seconds.
Table of User Options
User
No. Options
1
Programming
Mode
2
1st stage
differential
3
2nd stage
differential
(PRS4210 Only)
Extended
4
Hold Period
Filter
5
Service
Monitor
6 Adaptive
Recovery
Mode (ARM
4 Setting Your Program Schedule
Setting the Time and Day
1. In normal operating mode, press the DAY/TIME
button. The display will switch to the day/time
setting mode and the hour will be flashing.
2. Press
or
Press DAY/TIME.
3. Press
or
Press DAY/TIME.
4. Press
or
Factory Setting
Default Options
PRO 7 PRO 7
PRO 52
PRO NO
0.5 0.5, 1.0,
2.0
2.0 1.0, 2.0,
3.0, 4.0,
5.0, 6.0
LNG
LNG
24HRS
OFF
OFF
30, 60, 90, Selects a number of days before
120, 180,
365
OF REC
OF REC
)
TM
ON REC
to adjust the hour.
to adjust the minute.
to adjust the day of the week. Press RETURN to exit.
or button to change the setting for the
Comments
Select for 7 Day Programming Mode
Select for 5-2 Day Programming Mode
Select for Non-Programmable Mode
Select a 1st stage temperature
differential of .5˚, 1˚ or 2˚F (0.2˚,
0.5˚ or 1˚C)
Select a 2nd temperature
differential of 1˚, 2˚, 3˚, 4˚, 5˚ or 6˚F
(.5˚, 1˚, 1.5˚, 2˚, 2.5˚ or 3˚C)
Selects long (permanent) hold mode
Selects 24 hr. (temporary) hold mode
Disables filter service monitor feature
the thermostat will flash a Service
Filter reminder in the display.
Disables adaptive (early)
recovery mode
Enables adaptive (early)
recovery mode
4