Matrix R30 Manual Del Usario página 11

A Open HARDWARE FOR STEP 1.
1
B Attach the SEAT (1) to the SEAT POST (2)
using SEAT BRACKET (3) and 2 BOLTS
(A). Torque settings: 9.5 Nm / 7 lb-ft.
U30
Note: Tighten the bolts evenly by alternating between
U50
front and back until completely tightened.
Hardware For Step 1
Description Qty
A Bolt 2
3
1
2
A
A Open HARDWARE FOR STEP 2.
2
B Carefully pull the CABLE (4) through the RIGHT CONSOLE
MAST (6) using the LEAD WIRE (5) located inside the
CONSOLE MAST (6). Discard the lead wire.
U30
C Attach the RIGHT CONSOLE MAST (6) to
BIKE FRAME (8) using 5 BOLTS (B).
U50
D Attach the LEFT CONSOLE MAST (7) to BIKE FRAME (8)
using 5 BOLTS (B). Leave bolts loose until after step 3.
Note: Be careful not to pinch any wires while attaching the console mast.
Hardware For Step 2
Description
B Bolt
U50 SHOWN
5
Qty
10
4
7
8
6
B
4
11