J.P. SELECTA SEAL-1000 Manual De Instrucciones página 9

INSTRUCTION MANUAL CODE 80207 REV A
J
.P. SELECTA s.a.u.
May/2016
6 Initial assembling
The sealing machine comes disassembly for an easy transportation and packaging.
Locate the two black stands and the 4
screws M4x25 mm.
Place 9 rollers on each rod.
Fix the two bigger rods on the black
stands upper holes with the two M4
screws. Use the two «L» shape tools.
Screw the cutter knob
Ctra. NII Km 585.1 Abrera 08630 (Barcelona) España
e-mail: selecta@jpselecta.es - website: http://www.jpselecta.es
(It can be modifi ed without notice)
Fix the two stands on the rear sealing
machine body.
Fix the two smaller rods on the black
stands lower holes with the two M4
screws.
Insert the sealing lever on his squared
shape fi xing hole.
Fix the output tray into the two front
side pivots.
Tel 34 937 700 877 Fax 34 937 702 362
Page: 9