Safety Warnings - marklin ET 87 Serie Manual De Instrucciones

Only when the locomotive is operated with the
Control Unit, Mobile Station, or Central Station:
G Built-in interior lighting that can be controlled only
in operation with the 6021 Control Unit. The interior
lighting comes on constantly in all other modes of
operation after there is sufficient voltage present.
G Function (f4) is used to minimise the acceleration /
braking delay to facilitate shunting the train.
The maintenance work required with normal
operation is described below. Please see your
authorized Märklin dealer for repairs or spare parts.
No warranty or damage claims shall be accepted in
those cases where parts neither manufactured nor
approved by Märklin have been installed in Märklin
products or where Märklin products have been
converted in such a way that the non-Märklin parts
or the conversion were causal to the defects and / or
damage arising. The burden of presenting evidence
and the burden of proof thereof, that the installation
of non-Märklin parts or the conversion in or of Märklin
products was not causal to the defects and / or
6
damage arising, is borne by the person and / or
company responsible for the installation and / or
conversion, or by the customer.

Safety Warnings

G This locomotive is to be used only with an operating
system designed for it (Märklin 6646/6647
AC transformer, Märklin Delta, Märklin Digital
or Märklin Systems).
G This locomotive must never be supplied with
power from more than one transformer.
G Pay close attention to the safety warnings in the
instructions for your operating system.