Warm House Oslo OWF-10707 Manual Del Usuario página 8

Manual Operation

The switches are located on the top right hand side of the fireplace. The standby switch must
first be turned on.

Press the button once to turn on the fireplace and flame effect. A red indicator light will
appear to indicate that the function is ON.

Press the button for 3 seconds to operate the automatic color change function. The flame
colors will change every 10 seconds.

Press the 750W button once for low heat setting; press twice to turn off the heat.

Press the 1500W button once for high heat setting; press twice to turn off the heat.
Remote Control Operation

The power switch located at the right hand side of the fireplace must first be switched on; the
fireplace will beep to indicate that it is powered up.

Insert 2 x 1.5V AAA batteries (not included) into the battery compartment of the remote control.
Make sure they are inserted with the correct polarity. (The ‐/+ signs placed in the proper
position.) Securely close the battery compartment cover.

It takes some time for the receiver to respond to the transmitter. Do not press any buttons on
the remote control more than once within two seconds in order for the fireplace to operate
properly.

Press the standby button on the remote control once to turn on the fireplace with flame
effect.

Press the "750W" button once for low heat setting. Press the button again to switch off the heat.

Press the "1500W" button once for high heat setting. Press the button again to switch off the
heat.

Press the "DIMMER" button to change the flame color. Every time you push the button, the
colors will change in the following order:
o Amber
o Red
o Green
o Blue
o Red and Green
o Red and Blue
o Green and Blue
o Red and Amber
o Green and Amber
o Blue and Amber
Auto Safety Shut-Off Mechanism

This fireplace is equipped with a safety shut‐off feature which initiates if the fireplace overheats
(e.g. Due to blocked air vents). For safety reasons, the fireplace will NOT automatically reset,
and will need to be manually turned ON.

To restart the fireplace, unplug the fireplace from the power outlet for at least 15 minutes. Next,
reconnect to the power outlet and turn on the fireplace.
8