Technical Specifications - Uline H-800 Manual Del Usuario

cLEAnInG
Inside this dispenser:
• Brush out paper dust.
• Do not use spray cleaners
PORT cOnnEcTIVITY
The 9-pin female connector at the rear of the dispenser
is Input/Output (I/O) allowing communication with
optional devices such as the AMD-1, an Automatic
carton Measuring Device.
• On standard models, this I/O port is active for use
with pedal foot switches or other similar devices
which use the "contact closure" method of sending
a signal.
• On automatic models, this I/O also provides access
to the dispenser's RS-232c serial data port. Pedal
foot switches or other "contact closure" devices may
still be used on automatic models.
π
CHICAGO • ATLANTA • DALLAS • LOS ANGELES • MINNEAPOLIS • NYC/PHILA • SEATTLE • MEXICO • CANADA
PAGE 12 OF 24
MAINTENANCE CONTINUED

TECHNICAL SPECIFICATIONS

CHARACTERISTIC
Tape Width
Maximum Tape Roller Diameter
Tape Lengths Dispensed
Dispenser Speed
number of Brushes
Water Bottle capacity
Shipping Weight
Dimensions (L x W x H)
Power Requirements
555eS, eSA, eL, eLA
555eM, eMA
555eL, ejA
Exterior surface of the dispenser:
• Brush out paper dust.
• Do not use spray cleaners
MEASUREMENT
1.5 - 3"
10"
Short Models (auto & std.) 6-45"
Long Models (auto & std.) 12-90"
45 inches per second
3
34 oz.
32 lbs.
20 x 12.5 x 12"
115v 60Hz, 4 Amps
230v 50/60Hz, 2 Amps
100v 50/60Hz, 4 Amps
cOnnEcTOR cOnFIGURATIOnS
Both standard and automatic models are equipped
with 9-pin female D-type connectors.
1-800-295-5510
uline.com
1013 IH-800