Webasto Hollandia TVS 900 Manual Del Propietário página 4

H900_BA.book Page 2 Wednesday, May 30, 2007 12:04 PM
Dear Customer,
USA
Webasto Product North America. Inc. would like to thank you for
purchasing a Hollandia TVS 900 Series Sunroof. Below you will find
everything you need to know about your TVS 900 series twin vent sun-
roof. In order to achieve maximum sunroof functionality, please read
through these instructions carefully. Happy motoring!
®
SOFT TOUCH SWITCH
Make sure that your vehicle ignition is ON.
By quickly pressing the switch (approx. 0.1 seconds) the sunroof
will open or close immediately (depending on the position
of the panels). Movement of the panels can be stopped by quickly
pressing the switch again.
By quickly pushing the single
glass panels will move immediately into the corresponding
positions.
CLOSING OF THE SUNROOF
By quickly pushing the close button
position, the panels will close immediately.
AUTO-CLOSE
When turning off your vehicles ignition, you will hear a beep sound
to remind you that the auto-close will be activated. After three
seconds the sunroof will close automatically and will let you know
by beeping once.
Should you require the sunroof to stop, while closing, quickly
press the switch or . You can also prevent the panels from
closing by pressing the switch
interval.
When you switch the ignition on, the sunroof opens and closes in
the normal manner.
2
USER MANUAL HOLLANDIA TVS 900
or double vent button, the
, regardless of the panels
ROCKER SWITCH
or during the three second
ANTI-PINCH PROTECTION (Safety Feature)
The anti-pinch protection activates when the sunroof is closed ei-
ther by soft-touch control or in auto-close mode.
Should either panel encounter an obstacle while closing, it
immediately opens again:
• Ignition ON, Soft Touch control:
The sunroof will try to close (max. 8 times) until the obstacle
has been removed.
• Ignition OFF, Auto Close:
If the sunroof detects an obstruction one time, the sunroof will
stop and remain open and anti-pinch will be deactivated.
With this feature you are able to program a preset position for the
panels of the sunroof. The panels will move to the preset position
when quickly operating the comfort button
PROGRAMMING THE COMFORT POSITION:
1. Place the panels in the desired position using button
.
2. Push the comfort button and hold the button for about 6
seconds until you hear a beep.
On opening the sunroof with comfort button
sec.) the panels will stop in the preset position.
OPENING THE SUNROOF
Make sure that your vehicles ignition is ON.
By quickly pressing the switch (approx. 0.1 seconds) the
sunroof will open to the "double vent" position immediately.
By quickly pressing the switch again, the sunroof will move
to the "single vent" position.
.
or
(press approx. 0.1