Network Settings - Resol VBus LAN Manual De Instalación

4

Network settings

When UPnP access is activated, the operating system will
automatically recognise the VBus
Its IP address can then be seen in the control panel.
Note
In MS Windows from version 7 on, UPnP access is
activated by default. In earlier versions, UPnP access
must be activated manually.
If the IP addresses in the local network are not assigned by
a DHCP server, proceed as follows:
Î Connect the VBus / LAN interface adapter directly
®
to a PC.
The network settings of the PC used must be set to DHCP!
Î Configure the VBus / LAN interface adapter.
®
4.1 Finding the VBus
®
the local network
If the VBus ® / LAN interface adapter is not recognised au-
tomatically, the DeviceDiscoveryTool software on the CD-
ROM enclosed can be used. In order to use DeviceDiscov-
ery, Java must be installed.
/ LAN interface adapter.
®
/ LAN interface adapter in
4.2 Web interface
All adjustments for the VBus
be made with the Web interface.
The Web interface is integrated in the VBus
face adapter and can be run in an Internet browser.
The Web interface has the following functions:
• Displaying the status of the VBus
• Configuring the VBus / LAN interface adapter.
®
• Adjusting the network settings of the VBus
face adapter.
In order to access the Web interface, enter the IP address
of the VBus / LAN interface adapter into the address bar
®
of the browser.
The Web interface is not designed for controller access,
but for adjusting the network settings of the VBus
interface adapter.
When the Settings menu is selected, an authentication
enquiry will appear.
Enter the following credentials to authenticate:
User name: admin
Password: vbus
/ LAN interface adapter can
®
/ LAN inter-
®
® / LAN interface adapter.
/ LAN inter-
®
/ LAN
®
17