Changing The Password - Resol VBus LAN Manual De Instalación

Note
In order to change the password, see cap. 4.3.
By means of the Settings menu of the Web interface, the
following settings can be adjusted:
• Assign a static IP address to the VBus
adapter.
• Change the name and the password of the VBus
interface adapter.
• Reset the VBus / LAN interface adapter.
®
• Select the menu language for the Web interface.
• Change the UPnP-port number.
• Change the MTU.

4.3 Changing the password

Note
The password is valid for the Web interface au-
thentication enquiry as well as for the access via
RSC / RPT!
The default password for the authentication enquiry of the
VBus / LAN interface adapter is vbus. It can be changed in
®
order to prevent unauthorised access.
To change the password, proceed as follows:
Î Click on Settings in the Web interface.
Î Enter the desired password into the VBus Password
input field.
Î Click on Update Settings.
The new password is saved.
18
Accessing the device is not possible without the correct
password.
Î Note down the new password and keep it carefully!
If the password is lost, the device has to be reset to the fac-
tory settings. For more information see page 19.
/ LAN interface
®
/ LAN
®
Fig. 8
4.4 Changing the module name
In the same menu, a new module name can be assigned to
the VBus
played with its module name in the network.
Î Enter the desired name into the Module Name in-
put field.
Î Click on Update Settings.
The new module name is saved.
® / LAN interface adapter. The device will be dis-