Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
household filtration
Test the Filter
•
Slowly turn on water supply.
•
Press red pressure-relief button to
release any trapped air.
•
Check for leaks.
•
Turn on the nearest faucet and flush
for 40 minutes.
10
Step 4
Note: Place paper towels or rag under the filter
to catch any water drips.
*
Turn off household water supply.
*
Purge water from lines by turning on all faucets
and drain lines completely.
*
Press red pressure-relief button on housing
head to release pressure.
*
Unscrew and remove housing head using filter
housing wrench.
*
Remove black o-ring and inspect. Clean and
lubricate with silicone grease.
*
Clean grooves in top of filter housing where the
o-ring sits.
*
Place the clean, lubricated o-ring back in the
groove.
*
Screw filter housing back onto the
housing head and hand-tighten.
DO NOT OVERTIGHTEN.
*
Turn off the household water supply.
*
Purge water from water lines by turning on
all faucets in your home and draining completely.
*
Tighten all fittings.
*
Turn on the household water supply, and inspect
for leaks.
*
If leaks continue, disassemble the configured
unit, reapply plumber's tape or sealant, and
reinstall the filter.
» If leaks continue, turn off the water supply and call
Customer Service or your local plumber.
household filtration
Troubleshooting
Guide
Leaks between
head assembly and
filter housing
Leaks around fittings
house
Filt
(eve
Publicidad
Tabla de contenido
Solución de problemas
