Operation; Before Initial Use; Energy Saving Tips; Connecting The Cooler - Waeco CD-32-AC Instrucciones De Uso

CD-32-AC.book Seite 22 Donnerstag, 17. November 2005 3:23 15

Operation

6 Operation
6.1

Before initial use

Note
Before starting your new cooler for the first time, you should clean
it inside and outside with a damp cloth for hygienic reasons (please
also refer to the the "Cleaning and maintenance" chapter on
page 25).
6.2

Energy saving tips

Choose a well-ventilated installation location which is protected
from direct sunlight.
Allow food to cool down first before placing it in the device to
cool.
Do not open the device more often than necessary.
Do not leave the lid open for longer than necessary.
Avoid unnecessarily low or high inside temperatures.
6.3

Connecting the cooler

Connecting to a battery (vehicle or boat)
The cooler can be operated with 12 V DC.
Caution - Danger of damaging the device!
Disconnect the cooler and other consumers from the battery before
you connect the battery to a quick charging device.
Overvoltage can damage the electronics of the device.
For safety reasons the cooler is equipped with an electronic system
to prevent the polarity reversal. This protects the cooler against
short-circuiting when connecting to a battery.
➤ Plug the 12 V connection cable (fig. 3 1, page 2) into the
12 V DC connection socket (fig. 2 3, page 2) and connect it to
the cigarette lighter or a 12 V socket (5, page 3).
22
All manuals and user guides at all-guides.com
CD-32-AC