Troubleshooting - Bond 6103P Manual Del Propietário

TROUBLESHOOTING

PROBLEM
Igniter pin and burner are wet Wipe dry with a cloth
Igniter battery is incorrectly
inserted.
Igniter pin cracked or broken
Appliance won't
light
Electrode wire is loose or
disconnected
Electrode wire is shorting
between valve and igniter pin
No gas flow
Burner will not
light using a
match
Burner ports are clogged
Appliance emits
Flame is obstructed at burner
a lot of black
ports
smoke when lit
Sudden drop in
No gas flow
gas flow
EXPEDITE YOUR REQUEST FEEL FREE TO EMAIL US
OR VISIT TO OUR WEBSITE UNDER CUSTOMER SERVICE SUPPORT
CAUSE
IF YOU HAVE QUESTIONS OR CONCERNS
PLEASE CALL BOND TOLL FREE #
1-866-771-BOND(2663) OR TO BETTER
customer.service@bondmfg.com
www.bondmfg.com
BOND MANUFACTURING CO.
1700 West 4th Street, Antioch, CA 94509
CORRECTIVE ACTION
Check that battery is correctly inserted.
Call customer service for replacement
part
Reconnect wire to the igniter
box located inside the table
base behind the igniter button
Call customer service for replacement
part
Check if gas cylinder is empty. If yes,
replace.
Insert an opened paperclip into each of
the burner ports to clean them. Ensure
the appliance is off and all parts are
cooled before attempting to clean the
burner ports
Make sure all the gas burner ports are
free of any lava rocks or debris to allow
the gas to flow freely.
Check if gas cylinder is empty. If yes,
replace.
10