Publicidad
Idiomas disponibles
Idiomas disponibles
Using your Hob
To start cooking
1. After the hob be connected to electricity and power on.
Press and hold the ON/OFF
about 3 seconds till you hear a "beep" to turn the
hob on. Now the hob enters into Standby mode, all heat
setting indicators and Timer setting indicators shows "-"
2. Place a suitable pan on the cooking zone you wish to use.
• Make sure the bottom of the pan and the surface of the
cooking zone are clean and dry.
3.
Set heating level of cooking zone
1）For model MV 1601/MI 1500:
• There is separate
cooking zone for these models. Set heat setting by touching the
or
• If press and hold either of the two buttons, the value will adjust
down or up rapidly, from 0 to 9 in circle.
2) For model Free cook, before adjust heating level,
to touching the heating zone selection control button to
need select and active the cooking zone you wish to use.
The heat setting indicator of the selected zone flashing
when be active, then you could adjust its heat level by
adjust heat setting by sliding the slider control.
Notes:
1. After connect to electricity, when power on, the buzzer of hob beeps once,
all indicators light up for 1 second then go out.
2. When the hob in Standby mode, if there is no practice within 1 minute,
the electric hob will auto turn off, with buzzer beeps once.
3. To turn on hob, press the ON/OFF control button and hold on for about 3
seconds; To turn it off, just need to press ON/OFF button again.
4. The power level can be adjusted from 0 to 9, default setting is level 5.
5. The heat setting indicator of the selected zone flashing when adjusting.
After adjusting, the number flashing for 5 seconds then stop flashing,
then the setting is be confirmed.
and
button for corresponding cooking zone.
control button for
heat level control button for each
19
Publicidad
